918博天娱乐(中国)官方网站

Inverted bucket steam trap it is the use of condensed water and steam density difference between the working principle, the internal structure is connected by the lever system inverted bucket, to overcome the steam pressure switch inverted bucket trap internal is an inverted bucket for the liquid level sensitive parts, inverted bucket opening downward.When the device is just started, air and low-temperature condensed water appear in the pipe. At this time, the trap is fully open, air and low-temperature condensed water are discharged quickly, and the device quickly raises the temperature.When the steam enters the inverted bucket, the inverted bucket produces upward buoyancy, and the inverted bucket connects the lever to drive the valve center to close the valve.There is a small hole in the inverted bucket, which can automatically exhaust air. When part of the steam is discharged from the hole, another part of the steam produces condensate, and the inverted bucket loses buoyancy and sinks, and the inverted bucket is connected with a lever to drive the valve center to open the valve.When the steam again enters the inverted bucket, the valve is closed again and circulates, intermittently draining.

Product model: 983
Nominal diameter: DN15~65mm
Nominal pressure: PN0.01~ 1.6mpa
Operating temperature: ≤350℃
Main materials: forged steel, stainless steel, titanium alloy steel, chromium molybdenum steel, low temperature steel
Drive mode: manual
Design specification: GB/T 9093
Structure length: GB/T 12250
Threaded connections: ISO 228
Flange connection: JB/T 79,GB 9113,ANSI B16.34
Test and inspection: GB/T 13927